Where is the upsilon cube in spectrobes 2




















Press the L or R Buttons to scan the shape of the object. Depth: Indicates the depth of the buried object. Stress Gauge: Indicates the amount of stress a tool is causing on the object currently being excavated.

Try to keep it out of the red zone. Tool Display: Displays the currently selected excavation tool. Percent Excavated: Indicates the degree to which the object has been excavated. Exit: Quits the excavation process. Basic Controls L Button: Scans. R Button: Scans. Microphone: Used to blow away rock fragments.

Some tools may also be voice-controlled. Stylus: Uses the tool. Also used for menu selection. How to excavate 1.

From the excavation screen, touch the lower screen to begin breaking through the rock crust covering an object. When a portion of the object is exposed, use the stylus to operate the tool and begin actual excavation. Press the L or R Buttons to scan the buried object and determine its shape. This allows you to pick the appropriate tools for the excavation process.

The Drill L tool is set as the default tool when you begin an excavation. If you would like to use a tool that is not displayed on screen, touch Tool to call up a list of icons of tools in your possession. Then, touch and slide the desired tool icon into a toolbox. Touch Tool again to close the list of icons. When a tool is selected, the tool name and icon are displayed on the bottom left corner of the top screen.

Drill L: A basic excavation tool. A powerful drill mainly used for excavating around an object. Drill M: A basic excavation tool. Used to remove dirt and rock from atop an object. Drill S: A basic excavation tool. A drill mainly used to get into hard-to-reach areas. Blower: Used to blow away dust from a buried object. It has the same effect as exhaling into the DS microphone. Recovery Tool: Used to slightly fix damaged fossils, this tool can be used four times before it runs out.

Sonic Tool: A tool that gently excavates using sound waves. Activate it by speaking or blowing into the microphone. However, its success rate is quite low and even when it does work, you obtain no excavation experience points or bonuses. Solvent Liquid: Dissolves the ground to expose objects.

Useful for removing the rock and dirt from tight areas. Giga Tool: An automatic excavator that unearths objects using a laser. The higher the percentage excavated, the higher the chance of success. If you use the Giga tool on a mineral that you have previously successfully excavated by hand, it will excavate perfectly every time. However, you get no excavation experience points or bonuses when you use it.

As you gather points, your excavation experience level will rise. As your level rises, your chance of causing damage to a fossil or mineral during excavation will fall. The faster you can excavate an object without damage, the more points you will receive at the end of the process. The amount of time you used the scanner will affect the number of experience points you obtain as well.

If you excavate a fossil without any damage, it will have bonus minergy or come with custom parts. The custom parts found in fossils can be equipped once the awakened Spectrobe reaches Adult or Evolved form.

Allows you to select from one of four box icons. Rotating a box to the front Awaken and touching it allows you to access its functions. The Spectrobes that can be set in the Prizmod are as follows.

The four spaces from the center to the right are for support Spectrobes. Displayed below are all Spectrobes that are not in the Incubator i. The space to the upper left of the displayed Spectrobes is an empty space used for removing a Spectrobe. Spectrobes can be changed by touching the Spectrobe you wish to add and sliding its icon atop of the Spectrobe that you wish to replace. Slide the Spectrobe to an empty space to set it or remove it.

Search Spectrobes Allows you to exchange Spectrobes used for searching. Only one may be set at a time. Displayed below are all Child Spectrobes that are not in the Incubator.

Spectrobes can be changed by touching the Spectrobe you wish to use and sliding its icon over the Spectrobe that you wish to replace. Touch the fossil you want to awaken and it will move to the center automatically. Then slide the fossil upward into the awakening machine.

The custom parts found in fossils can only be equipped once the Spectrobe grows into Adult or Evolved forms.

Speak into the microphone on your DS to awaken them. The sound of your voice will move the voice meter. Match the volume of your voice to the level specified by the fossil you are awakening and hold your voice until the countdown reaches zero. If you match your voice well, the fossil will awaken into a Child Spectrobe.

Try it and see what happens! During color awakening, the voice meter will change to show three colors. During color awakening, you will always succeed at awakening the Spectrobe. The color of the meter when the Spectrobe awakens will determine its color. Name Input You can give names to the Spectrobes that you awaken. Use the touch keyboard on the bottom screen to input a name. The blue buttons on the left allow you to switch between English, European letters, and pictures.

When you are finished entering a name, press Enter to confirm it. When you awaken a Spectrobe, it will already have a name. If you want to enter a new one, delete the default name first. Incubator Commands and Capabilities The incubator is where you train your Spectrobes. Feeding minerals to a Spectrobe raises its level, allows it to evolve, and lets you attach custom parts. Pet Stylus Lets you touch and slide the stylus over the Spectrobes in the incubator to pet them.

Spectrobes love to be petted. By paying attention to the Spectrobes in this way, you can shorten the amount of time it will take for them to evolve in the incubator.

Zoom Feed Place 34 35 Place Allows you to select the Spectrobe s you wish to place in an incubator room. You can select any Spectrobe that is not already in an incubator. Feed Allows you to feed minerals to the Spectrobes in the incubator. Zoom Allows you to zoom in for a closer view of a Spectrobe in an incubator room. Evolution Encasing When a Spectrobe is about to evolve, a special mark will appear. Touching the Spectrobe will cause the Spectrobe to form an encasing. The encasing will appear on the screen.

Break the encasing with the stylus to cut it open. Once you do, the newly evolved Spectrobe will emerge. The amount of time depends on the type of Spectrobe. There are four incubator rooms, each capable of holding up to two Spectrobes. Just touch the cube icon for a room to enter it. Note that no new additional icons will appear in the incubator.

Attach Custom Parts — Allows you to attach custom parts to a Spectrobe. A new icon will appear in the incubator. Change Terrain — Allows you to change the terrain in the incubator. You can choose from among Corona, Aurora, and Flash terrains. Training Spectrobes in a terrain that matches their own properties has the following effects: 1. It shortens the amount of time needed to evolve.

It increases the amount of minergy obtained from minerals. On the other hand, raising a Spectrobe in a terrain that does not match its property can hinder it from evolving or reduce the amount of minergy it obtains from minerals.

There are four menu items. Touch the icons of the Spectrobes to display their data. Touch the screen tags to sort the view of the Spectrobes in your possession.

The options are from left to right : 38 39 1. Organizes by type, broken down into Child, Adult and Evolved forms. Custom Parts Server Allows you to view all custom parts in your possession. Custom parts currently attached to Spectrobes are not displayed, however. Each Spectrobe can become one of nine combinations of color and custom parts. The Map contains data about all of the Spectrobes that you have obtained. Try your best to complete the entire database!

Name Allows you to change the name of a Spectrobe. Battles Battles occur when you encounter a black vortex while moving around within the different planets. Control Rallen and the Spectrobes to defeat the enemy Krawl. You win a battle by defeating all of the Krawl that you encounter.

When a battle is over, the Spectrobes that participated may receive minergy and you may obtain currency. Sometimes you may also find items. You must wait for the stamina gauge to refill before Rallen can issue another command to a Spectrobe.

X Button: Make Rallen attack using a weapon or an item. Only works when you have accumulated enough CH Energy. Aurora is stronger than Flash. And Flash is stronger than Corona. Two Spectrobes trained in the same incubator have even stronger combo attacks!

Next, press the L Button and the R Button at the same time and the Spectrobes will do a combo attack. Nu - Partnering Location:? Info: A key to fighting with Spectrobes is effectively partnering with them to create the strongest attacks.

Try to lure an enemy directly in front of a Spectrobe and then attack with a powerful technique. Charge up your CH gauge and use a powerful CH tech or combo attack for the best results! Each has Child, Adult, and Evolved Forms. Each of these forms has three color variations. Each Adult and Evolved Form has two types of custom parts.

There are four types of support. Make sure to consider the abilities of the Support Spectrobes when setting Spectrobes in the Prizmod. For example, there is a mineral called the Evolve Mineral, that can instantly evolve any Spectrobe.

There are also three types of Chroma Minerals, which can change the colors of a Spectrobe. Rho - Color Awakening Location: Ziba area 3 blue moon Info: Color awakening refers to altering a Spectrobe's color by changing your voice when you awaken it. Check the color on the voice meter and adjust the level of your voice to match the color you want. Awakening - Awakening refers to restoring a fossilized Spectrobe to child form.

If a line with an arrow appears in the voice gauge, your voice must make the meter cross the line. If a bracket appears in the voice gauge, your voice must make the meter stay within the bracket. Training - Spectrobes must undergo training in the Lab System's incubator. Spectrobes undergo training, as well as grow, when they obtain the minergy contained in minerals.

A Spectrobe's abilities and rate of growth vary based on the amount and type of minerals it is fed. Leveling up - Feeding minerals to Spectrobes raises their minergy levels. The minergy gauges show these levels. Each Spectrobe has levels. Daichi , Genshi. Evolving - Evolving refers to the changes a Spectrobe undergoes as it grows from Child Form into Adult. A Spectrobe must be placed in one of the incubators and trained for a certain period of time to evolve.

The exact time depends on the Spectrobe. Some need to attain a certain level, or ability to evolve. If you put two Spectrobes in the same incubator at the same time, they will become friends. Once two Spectrobes have become friends, their combo attack will become much stronger. Custom Parts - Custom parts are attachments that can be used to modify a Spectrobe's body.

Attaching custom parts to a Spectrobe will also change it's name. You can only attach custom parts to Adult and Evolved Spectrobes. Spectrobes evolve through three forms: Child, Adult, and Evolved. The Evolved Form is the strongest.

Battle - You can set up to six Spectrobes in the Prizmod, two of which can emerge to fight during battle. Spectrobes was created on You search and a few times you will find evolve minerals you feed those to the child form of spectrobes. Spectrobes 1 : feed them minerals, or cheat or watevr. Spectrobes 2 : dunno. Well, the most powerful is an ultimate spectrobe in a geo.

But the strongest spectrobes are dark spectrobes at lv. Type your answer here Then you know that the medium is vacuum in free space. And by the way, it's "epsilon naught", not "epsilon not".

Log in. Nintendo DS. Study now. See Answer. Best Answer. Study guides. Q: Where is the epsilon cube in spectrobes? Write your answer Related questions.



0コメント

  • 1000 / 1000